This is a guide on how to integrate an Enegic Monitor to a NexBlue Edge. The configuration steps on the NexBlue end can be carried out by either Installers or Users.

Before you start:

• A Monitor must be installed and configured to measure total consumption. You can find the steps below:

Installation Quick Start Guide from Enegic

• The NexBlue Edge must be commissioned and registrered in the NexBlue Partner or myNexBlue APP

Installation Guide video from NexBlue

NexBlue Partner APP Guide video from NexBlue

For Installers:

1. Go to the NexBlue Partner APP for Installers

• If you want to add Enegic to a New Location

৹ Tap Start configuration or Add new location in the Locations section

• If you want to add Enegic to an Existing Location

৹ Tap Locations

৹ Select the Location that the Enegic Monitor detects

৹ Tap Settings

• Following the aforementioned steps

৹ Tap Operator

৹ Select Enegic

৹ Copy Location ID

2. Go to the Enegic APP

• Go to Settings-Licenses
• Scan the QR code on the included integration license in the Enegic product package box
• Go to Settings-Reporters and tap Add new Reporter
• Select Nexblue as the type of reporter from the list
• Enter an appropriate name such as NexBlue charge control
• Paste the Location ID from step 1 into the External ID of installation field
• Enter Main fuse size
• Enter a Safe charge level if the Enegic Monitor goes offline
• Ensure the correct Enegic monitor is selected as total consumption measurement. Then, press Save to create the reporter

3. Return to the operator page in the NexBlue Partner APP

• Press Activate the operator to jump to the Enegic Monitor interface

 

 

For Users:

1. Go to the myNexBlue APP for Users

• Tap Locations
• Select the Location that the Enegic Monitor detects
• Tap Settings
• Tap Operator
• Select Enegic
• Copy Location ID

2. Go to the Enegic APP

• Go to Settings-Licenses
• Scan the QR code on the included integration license in the Enegic product package box
• Go to Settings-Reporters and tap Add new Reporter
• Select Nexblue as the type of reporter from the list
• Enter an appropriate name such as NexBlue charge control
• Paste the Location ID from step 1 into the External ID of installation field
• Enter Main fuse size
• Enter a Safe charge level if the Enegic Monitor goes offline
• Ensure the correct Enegic monitor is selected as total consumption measurement. Then, press Save to create the reporter

3. Return to the operator page in the NexBlue Partner APP

• Press Activate the operator to jump to the Enegic Monitor interface