This is a guide on how to install Monta on the NexBlue charger. The configuration steps on the NexBlue end can be carried out by either Installers or Users.


Before you start:

 

  • The NexBlue charger must be commissioned and registrered in the NexBlue Partner or myNexBlue APP.
Installation Guide video from NexBlue
NexBlue Partner APP Guide video from NexBlue
  • Charger firmware at least version 1.1.2.
  • NexBlue Partner APP at least version 3.3.1. myNexBlue APP at least version 3.2.0.
  • Please ensure a strong Wi-Fi connection for successful charger configuration.

For Installers:

  1. Go to the NexBlue Partner APP for Installers
    • If you want to install Monta to a New Location
      • Tap Start configuration or Add new location in the Locations section
    • If you want to install Monta to an Existing Location
      • Tap Locations
      • Select the Location that Monta will operate
      • Tap Settings
  2. Tap Operator
  3. Select Monta
  4. Tap Activate the operator to jump to the location settings interface which shows the Operator is Monta.
  5. Resolve the issues and retry the configuration if any chargers failed. (Optional)
  6. After completing the above process, try to connect your NexBlue charger through either the Monta app or the Monta Portal.

 

For Users:

 

  1. Go to the myNexBlue APP for Users
    • Tap Locations
    • Select the Location that the Enegic Monitor detects
    • Tap Settings
  2. Tap Operator
  3. Select Monta
  4. Tap Activate the operator to jump to the location settings interface which shows the Operator is Monta.
  5. Resolve the issues and retry the configuration if any chargers failed. (Optional)
  6. After completing the above process, try to connect your NexBlue charger through either the Monta app or the Monta Portal.