Install OCPP on the NexBlue charger

This is a guide on how to install OCPP on the NexBlue charger. The configuration steps on the NexBlue end can be carried out by either Installers or Users.

Before you start:

  • The NexBlue charger must be commissioned and registered in the NexBlue Partner or myNexBlue APP.
Installation Guide video from NexBlue
NexBlue Partner APP Guide video from NexBlue
  • Charger firmware at least version 1.1.2.
  • NexBlue Partner APP at least version 3.3.1. myNexBlue APP at least version 3.2.0.
  • Please ensure a strong Wi-Fi connection for successful charger configuration.

For Installers:

  1. Go to the NexBlue Partner APP for Installers
    • If you want to install OCPP to a New Location
      • Tap Start configuration or Add new location in the Locations section
        Frame 4
    • If you want to install OCPP to an Existing Location
      • Tap Locations
      • Select the Location that OCPP will operate
      • Tap Settings
        Settings
  2. Tap Operator
  3. Select Customized OCPP platform
  4. Enter the OCPP server URL (ws or wss) and Password (optional)
  5. Tap Confirm to jump to the location settings interface which shows the Operator is Customized OCPP platform
  6. Resolve the issues and retry the configuration if any chargers failed (Optional)

For Users:

  1. Go to the myNexBlue APP for Users
    • Tap Locations
    • Select the Location that OCPP operate
    • Tap Settings
      Settings
  2. Tap Operator
  3. Select Customized OCPP platform
  4. Enter the OCPP server URL (ws or wss) and Password (optional)
  5. Tap Confirm to jump to the location settings interface which shows the Operator is Customized OCPP platform
  6. Resolve the issues and retry the configuration if any chargers failed (Optional)